UG103M

Setting Items

You can change the copy settings such as magnification and intensity.

Print Settings Screen

Note
  • For details on the print setting screen or the setting item for Photo copy, see Copying Photos.

How to display the print setting screen varies with the copy menu.

  • In Standard copy:

    The following screen is displayed by pressing the right Function button on the Copy standby screen.

    figure: LCD
  • In Borderless copy or Frame erase copy:

    The following screen is displayed before copying.

    figure: LCD

Setting Items

You can specify the following setting items.

Use the UPDOWN button to change the setting item and use the LEFTRIGHT button to change the setting.

figure: LCD
Note
  • Depending on the copy menu, some setting items cannot be selected. This section describes the setting items in Standard copy.

    The setting item which cannot be selected is displayed grayed out.

    For details on the setting items for Photo copy, see Copying Photos.

  • Some settings cannot be specified in combination with the setting of other setting item or the copy menu. If the setting which cannot be specified in combination is selected, Error details is displayed on the LCD. In this case, press the left Function button to confirm the message, then change the setting.

  • The settings of the page size, media type, etc. are retained even if the machine is turned off.

  • When copying starts in the copy menu that is not available with the specified setting, The specified function is not available with current settings. is displayed on the LCD. Change the setting, following the on-screen instructions.

  1. Magnif. (Magnification)

    Specify the reduction/enlargement method.

    Reducing or Enlarging a Copy

  2. Intensity

    Specify the intensity. When Auto is selected, the intensity is adjusted automatically according to the originals loaded on the platen glass. Auto is displayed on the Copy standby screen.

    figure: LCD
    Note
    • When Auto is selected, load the original on the platen glass.

  3. Page size

    Select the page size of the loaded paper.

  4. Type (Media type)

    Select the media type of the loaded paper.

  5. Print qlty (Print quality)

    Adjust print quality according to the original.

    Important
    • If you use Fast with Type set to Plain paper and the quality is not as good as expected, select Standard or High for Print qlty and try copying again.

    • Select High for Print qlty to copy in grayscale. Grayscale renders tones in a range of grays instead of black or white.

  6. Layout

    Select the layout.

    Copying Two Pages to Fit onto a Single Page

    Copying Four Pages to Fit onto a Single Page

  7. 2-sidedPrintSetting

    Select whether to perform two-sided copying.

    Two-Sided Copying

  8. Collate

    Select whether to obtain sorted printouts when making multiple copies of a multi-paged original.

    Collated Copying

Page top